The MCX-200 series is a 3D digital microscope that combines the high magnification capabilities of traditional microscopes with advanced digital image processing technology. Its main feature is the ability to provide high-resolution 3D images with an extended depth of field, allowing clear imaging of sample surfaces at different heights simultaneously.
Smart 3D Digital Microscope with Super Depth of Field
MCX-200 series
| The MCX-200 series is a 3D digital microscope that combines the high magnification capabilities of traditional microscopes with advanced digital image processing technology. Its main feature is the ability to provide high-resolution 3D images with an extended depth of field, allowing clear imaging of sample surfaces at different heights simultaneously. Compared to traditional microscopes, the deep focus microscope stacks multiple images from different focal planes of the sample, merging them into a single image with an extended depth of field. This is particularly useful for observing complex-shaped samples or microstructures with varying heights. It is widely used in fields such as precision manufacturing, materials science, biology, and electronic component inspection, offering precise surface detail capture, 3D measurement, and structural analysis. |
Stereoscopic 3D imaging, super depth of field synthesis
Use depth of field synthesis technology to construct three-dimensional graphics. The graphics can be dragged and rotated 360 degrees for viewing. The cutting line can be adjusted at any angle and position to generate a cross-section.
Applications
|
|
Model | MCX-S-200 | ||
Camera | Image sensor | 1/2-inch, 6-megapixel CMOS image sensor | |
Scanning system | CCIS Infinity Flat Field Chromatic Aberration Correction System | ||
Frame rate | 30 fps | ||
Resolution | 3072 x 2048 | ||
High dynamic range | 16-bit intensity range through RGB data from each pixel | ||
Gain | Manual, Preset | ||
Electronic shutter | Auto, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000 | ||
White balance | Manual, Preset (2700K, 3200K, 5600K, 9000K) | ||
Back-focus adjustment | Not required | ||
Interface | LAN | RJ-45 (1000 BASE-T) | |
USB 2.0 | 2 ports | ||
HMDI | 1 port | ||
Input | Mouse input | Support USB mouse | |
Keyboard input | Support USB keyboard | ||
light source | Type | High brightness LED coaxial illumination | |
Service life | 40000 hours | ||
Optical magnification | 6000X (max) | ||
Physical magnification | 50X to 1000X | ||
HDR | Support wide dynamic | ||
Observation tube | 20° inclined trinocular tube Trinocular light path 2-step selection | ||
Objective | Plan S-APO Semi-apochromatic Metallographic Objectives (5X/0.5, 10X/0.3, 20X/0.45, 50X/0.8, 100X/0.9) | ||
XYθ stage | XY stage | Motoried | |
XY motorized stage motor | 2-phase stepping motor | ||
XY motorized stage movement speed | 5 mm/sec 0.20in/sec (max) | ||
XY stage movement range | Top surface: 100 mm x 109 mm | ||
θ rotation angle | / | ||
XYθ stage size | Top surface: 200 mm x 180 mm | ||
Transmitted illumination-compatible magnification | 20X or higher | ||
Focus Z axis | Z stage | Motoried | |
Z motorized stage motor | 2-phase stepping motor | ||
Z motorized stage resolution | 0.1 µm | ||
Z motorized stage travel speed | 1.4 mm/sec | ||
Z stage travel range | 30 mm | ||
Power supply | Power voltage | 100 to 240 VAC ± 10% 50/60 Hz | |
Power consumption | 250 VA | ||
Environmental resistance | Operating ambient temperature | +5 to 40℃ | |
Operating ambient humidity | 80% RH or less (no condensation) | ||
Weight | Approx 20.8 kg | ||
| Documents |
|
|
|
|
| Type | Specification | Manual | 3D Drawing | PC Setup Software |
| Size | 2MB | 2MB | 1MB | 12MB |
| ﹁ | ||||
The download system is under upgrade.. Please contact the service personnel connected to you for relevant information. | ||||
| ﹂ |
